IEC 62196 Type 2 EVSE Home Charger 16A 250V with Current Adjustable
Portable EV Charger
PRODUCT DESCRIPTION
Portable EV Charging Cable is so convenient , portable, and
plug-and-play. This product is independently researched and
accordance
with the latest national standards. It has good performance when
charging. There are more electric protections and direct
human-computer
interaction interface. Control box is durable by adopting ergonomic
surface design which makes the shell become solider and stronger.
Item | Mode 2 EV Charger portable charger |
Install | Portable, plug and Play |
Output Current | 6A Min - 16A Max |
Voltage(choose one only) | AC220V/120V/208V/240V |
Input Voltage AC | 110-250V 50Hz/60Hz |
International Protection Marking | IP66 |
Output Detection | 1.Short circuit protection 2.Over and under frequency protection 3. Over and under Current Protection 4.Leakage Current Protection (restart recover) 5.Over Temperature Protection 6.Overload protection (self-checking recover) 7. Ground Protection 8.Over voltage and under-voltage protection 9.Lighting Protection |
Operating Temperature | -25℃~+55℃ |
Storage Temperature | -40℃~+80℃ |
Operating Humidity | 20%-85% |
Dimension | Control Box:170(L)*84(M)*42mm(H) Device cable: 6M or customized(L) |
Weight | 2.8kg |
Standard | IEC 62752 , IEC 61851 |
How to start charging
Step 1. Take out the charger and firmly insert the plug into
socket-outlet.
Step 2. Pull cap lightly, completely plug the vehicle connector into your
vehicle inlet.
Step 3. Factory default current is 32A, please press the button of
"CURRENT SETTING" to adjust your required current. amperes to max.
32 ampere cycles. The device will default to the last current
setting when you charge next time.
Step 4. The device start charging automatically while the READY/CHARGE,
POWER indicators are all green.
How to stop charging
Step 1. Disconnect the vehicle connector from the vehicle inlet.
Step 2. Close protective cap of vehicle inlet, put on the protective cap
of vehicle connector.
Step 3. Disconnect the plug from the socket-outlet.
Step 4. Pack up the EV charger cable and put into the bag.
Precautions
Please check if the device is intact and items are accordance with
the packing list when you receive the package. If there are any
abnormalities,
please contact the sales timely or reject the goods.
Power-supply side input cable should be at least 3x2.5mm
²(recommended 3x4mm²).It is suggested that the power distribution
is done by the professionals.
Do not submerge the control box or charging connector in water, and
don't step on, pull, fold or knot the cable.
Ensure charging connector, plug, cable and control box are free of
any abnormalities such as scratches, rusts, cracks, etc.
Don't charge if the socket is damaged, rusted, cracked or loosely
connected, then contact the professionals to dispose.
Wipe with a clean and dry cloth if the plug gets dirty or wet.
Ensure power plug and socket are consistent before
charging,especially the Current & Voltage.
Certification: CE
